天津11选5官网

欢迎来到山东豪润装饰工程天津11选5官网官网!
全国咨询热线:1786660745615253122210
您的位置: 天津11选5官网>> 产品中心 >>办公玻璃隔断

办公玻璃隔断设计

玻璃材料常用的玻璃材料有平板玻璃、磨砂玻璃、压化玻璃、彩色玻璃等。所选玻璃品种和厚度由设计确定。

在线咨询 服务热线17866607456      15253122210
产品详情

一、玻璃隔断构造

I. Glass partition structure

1.玻璃材料常用的玻璃材料有平板玻璃、磨砂玻璃、压化玻璃、彩色玻璃等。所选玻璃品种和厚度由设计确定。

1. Glass materials commonly used are flat glass, ground glass, pressed glass, colored glass, etc. The selected glass varieties and thickness are determined by the design.

2.构造要点玻璃隔断下部做法主要按设计要求,一般有罩面板、板条墙抹灰和平砖墙。

2. The main points of construction are the glass partition of the lower part according to the design requirements. Generally, there are cover panel, slab wall plastering and flat brick wall.

二、安装施工工艺要点(1)按照设计尺寸在墙上弹出垂线,并在地面及顶棚上弹出隔断的位置。

2. Key points of installation and construction technology (1) Pop up vertical line on wall according to design size, and pop up partition position on ground and ceiling.

(2)根据图纸要求,在已弹出的位置线上做出下半部 (罩面板、板条或砌砖),并与两端的结构 (砖墙或柱)锚固。

(2) According to the requirements of the drawings, make the lower half (cover panel, slab or bricklaying) on the pop-up position line, and anchor the structure (brick wall or column) at both ends.

(3)完成隔断上部的安装。其安装顺序为:

(3) Complete the installation of the upper partition. The installation sequence is as follows:

①检查砖墙上木砖是否已按规定埋设;②按弹出的位置线先立靠墙立筋,并用钉子与墙上木砖钉牢;③再钉上、下楹及中间楞木。

(1) Check whether the wooden bricks on the brick wall have been laid in accordance with the regulations; (2) erect the vertical reinforcement against the wall first according to the pop-up position line, and nail it firmly with the wooden bricks on the wall; and (3) nail the top, bottom and middle corrugated woodhttp://www.024dayin.com

热品推荐
网站地图 天津11选5 吉林快3 天津11选5 天津11选5 天津11选5 天津11选5 天津11选5官网 天津11选5 吉林快3 天津11选5